Lexmark X46 Series, Service Manual

Page: 115 / 310

Diagnostic aids
3-9
7014-xxx
Disable Scanner
This menu item is used to disable the MFP scanner if it is malfunctioning. The MFP must be powered off and on
for the new settings to take effect.
To change this setting:
1. Touch Disable Scanner from the Configuration Menu.
2. Touch or to scroll through the setting's other possible values. The settings are Enable, Disable, ADF
disable.
3. To save the setting's new value, touch Submit .
Paper Prompts
When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting
controls the tray the user is directed to fill. Selections are Auto (default), MP Feeder, and Manual Paper.
To change this setting:
1. Touch Paper Prompts from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's other possible values.
3. To exit this screen without changing the setting's value, touch Back .
4. To save the setting's new value, touch Submit .
Envelope Prompts
This setting controls the tray the user is directed to refill when a specific envelope size is out. The selections are
Auto (default), MP Feeder, and Manual Env.
To change the value of this setting:
1. Touch Env Prompts from the Configuration Menu. [setting's current value] appears on the touch-
screen.
2. Touch or to scroll through the setting's possible values.
3. To exit this screen without changing the setting's value, touch Back .
4. To save the setting's new value, touch Submit .
Action For Prompts
This setting determines which input source receives paper-related or envelope-related change prompts when
they occur.
To change the value of this setting:
1. Touch Action for Prompts from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to change the setting’s value. The values are Prompt user, Continue, and Use current.
3. To save the setting's new value, touch Submit .