Lexmark X46 Series, Service Manual

Page: 110 / 310

3-4
Service Manual
7014-xxx
Reset Photoconductor Maintenance Counter (Reset PC Cnt)
This setting resets the photoconductor kit page counter and clears any warnings or photoconductor exhausted
messages. This operation should be performed only after a new photoconductor unit has been installed.
USB Scan to Local
USB Scan to Local enumerates a USB simple device or USB composite device. In the off position the simple
USB device is enumerated: in the on position, the composite USB device is enumerated.
To change this setting:
1. Touch USB Scan to Local from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's possible values.
3. Touch Back to cancel and return to the Configuration Menu.
4. Touch Submit to save the change.
Print Quality Pages
This setting is a limited version of the Print Quality Pages setting that appears in the Diagnostics menu. This
setting reports the values of a broad range of printer settings and tests the printer’s ability to generate
acceptable printed output.
To print the Print Quality Pages:
1. Touch Print Quality Pages from the Configuration Menu.
Printing Quality Test Pages...
appears on
the LCD.
Touch Back to return to the Configuration Menu.
The Reports menu contains two selections: Menu Settings Page and Event Log.
Menu Settings Page
To print the Menu Settings page, press . Press to return to the Configuration menu.
Event Log
The event log provides a history of printer errors. The event log can only be printed in the Configuration
menu. Additional options are available in the Diagnostics menu. See
“Reports” on page 3-32 .
To print the event log:
1.
Select Print Event Log from the Event Log menu.
2.
Press to return to the Configuration menu.
Note: An event log printed from the CONFIG MENU will not contain debug information or secondary
codes for 900 service errors. However, the event log printed from DIAGNOSTICS mode does include this
information.
Panel Menus
Lets the system support person enable or disable the operator panel menus. Selecting On (the default) allows
users to change values for the printer. Off disables the users’ access to menus. If a user presses Menu ( ),
they receive a message that the panel menus are locked. When set to Off , this setting restricts all menu access,
even to menus or items set for PIN access. However, when set to On , all PIN restrictions are restored.