Lexmark X46 Series, Service Manual

Page: 116 / 310

3-10
Service Manual
7014-xxx
Jobs on Disk
Jobs On Disk allows you to delete buffered jobs saved on the disk.
To delete jobs saved on the disk:
1. Touch Jobs On Disk from the Configuration Menu.
2. Touch to decrease the setting's value; touch to increase the setting's value.
3. Touch Back to cancel and return to the Configuration Menu.
Disk Encryptyion
This setting determines if the printer encrypts the information that it writes to the hard disk. The values are
Disable and Enable.
Warning: If the value is changed from Enable to Disable or from Disable to Enable , then the printer
completely formats the hard disk. All information on the disk will be unrecoverable.
To change this setting:
1. Touch Disk Encryption from the Configuration Menu.
Note: If an advanced password has been established, you must enter this password in order to change the
setting. If no advanced password exists, you can establish one by using the keyboard that appears on the LCD.
2. Touch Submit to save the change.
3. Touch Back to cancel and return to the Configuration Menu.
If you remove an encrypted disk from a device and then try to install another disk,
Disk Corrupted. Reformat?
appears on the LCD. You can format the newly installed disk or remove it from the device.
When you touch Enable (encryption) or Disable (formatting),
Contents will be lost. Continue?
appears on
the LCD. Touch No to cancel or Yes to proceed. If you touch Yes , the printer performs the selected action on
the hard disk. The following graphic appears when the encryption process is selected:
Encrypting Disk
1/2 0%
DO NOT
POWER OFF