Lexmark CX820 Series User Manual Download

Page: 142 / 199

Ghost images

A B C D
A B C D

Leading edge

Trailing edge

Action

Yes

Step 1

Load the tray with the correct paper type and weight.

Resend the print job.

Do ghost images still appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Depending on your operating system, specify the paper type
and weight from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded in
the tray.

•

You can also change the settings on the printer control
panel.

Resend the print job.

Do ghost images still appear on prints?

Go to step 3.

The problem is
solved.

Step 3

Replace the imaging unit or imaging kit, and then resend the print
job.

Do ghost images still appear on prints?

Contact

customer

support

The problem is
solved.

Gray background

ABCDE

Leading edge

Trailing edge

Troubleshooting

142

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands