Lexmark CX820 Series User Manual Download

Page: 135 / 199

Paper curl

Action

Yes

Step 1

Move the paper guides in the tray to the correct position for the
paper loaded.

Is the paper still curled?

Go to step 2.

The problem is
solved.

Step 2

Depending on your operating system, specify the paper type
and weight from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded in
the tray.

•

You can also change the settings on the printer control
panel.

Resend the print job.

Is the paper still curled?

Go to step 3.

The problem is
solved.

Step 3

Remove paper from the tray, and then turn it over.

Resend the print job.

Is the paper still curled?

Go to step 4.

The problem is
solved.

Step 4

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Resend the print job.

Is the paper still curled?

Contact

customer

support

The problem is
solved.

Tray linking does not work

Action

Yes

Step 1

Check if the trays contain paper of the same size and type.

Check if the paper guides are positioned correctly.

Print the document.

Do the trays link correctly?

The problem is
solved.

Go to step 2.

Troubleshooting

135

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands