Lexmark CX820 Series User Manual Download Page 13

Page: 13 / 199

Staple ﬁnisher

Note:

This option is not supported if another ﬁnisher is installed.

Multiposition staple, hole punch ﬁnisher

Note:

This option is not supported if another ﬁnisher is installed.

Mailbox

Optional 2200

‑

sheet tray

Caster base

Optional 550

‑

sheet tray

Attaching cables

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—POTENTIAL INJURY:

To reduce the risk of ﬁre, use only a 26 AWG or larger

telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.

Learning about the printer

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands