Lexmark CX820 Series User Manual Download

Page: 137 / 199

Printing problems

Conﬁdential and other held documents do not print

Action

Yes

Step 1

From the control panel, check if the documents appear in the
Held Jobs list.

Note:

If the documents are not listed, then print the

documents using the Print and Hold options.

Print the documents.

Are the documents printed?

The problem is
solved.

Go to step 2.

Step 2

The print job may contain a formatting error or invalid data.

•

Delete the print job, and then send it again.

•

For PDF ﬁles, generate a new ﬁle, and then print the
documents.

Are the documents printed?

The problem is
solved.

Go to step 3.

Step 3

If you are printing from the Internet, then the printer may be reading
the multiple job titles as duplicates.

For Windows users

Open the Printing Preferences dialog.

From the Print and Hold section, select

Keep duplicate

documents

Enter a PIN.

Resend the print job.

For Macintosh users

Save and name each job differently.

Send the job individually.

Are the documents printed?

The problem is
solved.

Go to step 4.

Step 4

Delete some held jobs to free up printer memory.

Resend the print job.

Are the documents printed?

The problem is
solved.

Go to step 5.

Troubleshooting

137

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands