Lexmark CX820 Series User Manual Download Page 152

Page: 152 / 199

Toner easily rubs off

Leading edge

Trailing edge

ABC

DEF

Action

Yes

Depending on your operating system, specify the
paper type, texture, and weight from the Printing
Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper
loaded in the tray.

•

You can also change the settings on the printer
control panel.

Resend the print job.

Does the toner still rub off?

Contact

customer

support

The problem is solved.

Uneven print density

Action

Yes

Replace the imaging unit or imaging kit, and then resend the print
job.

Warning—Potential Damage:

Do not expose the imaging unit or

imaging kit to direct light for more than 10 minutes. Extended
exposure to light can cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch the

underside of the imaging unit or imaging kit.

Is the print density uneven?

Contact

customer

support

The problem is
solved.

Troubleshooting

152

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands