Lexmark CX820 Series User Manual Download Page 176

Page: 176 / 199

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

Align the printer with the optional tray, and then lower the printer until it

clicks

into place.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

If necessary, manually add the tray in the print driver to make it available for print jobs. For more information,
see

“Adding available options in the print driver” on page 188

When installing more than one hardware option, follow this order of installation.

•

Caster base

•

Optional 2200

‑

sheet tray

•

Optional 550

‑

sheet tray

Upgrading and migrating

176

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands