Lexmark CX820 Series User Manual Download

Page: 24 / 199

Flex, fan, and align the paper edges before loading.

Load the paper with the printable side faceup.

Notes:

•

Load letterhead faceup with the header on the left side of the tray for one

‑

sided printing.

•

Load letterhead facedown with the header on the right side of the tray for two

‑

sided printing.

•

Load letterhead faceup with the header on the right side of the tray for one

‑

sided print jobs that

require ﬁnishing.

•

Load letterhead facedown with the header on the left side of the tray for two

‑

sided print jobs that

require ﬁnishing.

•

Load pre

‑

punched paper with the holes toward the front or left side of the tray.

•

Do not slide paper into the tray.

•

Make sure that the stack height is below the maximum paper ﬁll indicator. Overﬁlling may cause
paper jams.

Insert the tray.

If loading a paper type other than plain, set the paper size and type to match the paper loaded in the tray.

Loading paper and specialty media

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands