Lexmark CX820 Series User Manual Download

Page: 31 / 199

Copying

Making copies

Load an original document into the ADF tray or on the scanner glass.

Notes:

•

To avoid a cropped image, make sure that the size of the original document and output is the same.

•

To make a quick copy, from the control panel, press

From the home screen, touch

Copy

, and then specify the size of the original document.

Note:

If the document is a mix of different sizes, then select

Mixed Letter/Legal

If necessary, specify a tray or feeder and a different output size.

Send the copy job.

Copying photos

Place a photo on the scanner glass.

From the home screen, touch

Copy

Content

Photo

From the Content Source menu, select the setting that best matches the original photo.

Send the copy job.

Copying on letterhead

Load an original document into the ADF tray or on the scanner glass.

From the home screen, touch

Copy

, and then specify the size of the original document.

Touch

Copy to

, and then select the tray that contains the specialty media.

If you are loading the specialty media into the multipurpose feeder, then navigate to:

Multipurpose Feeder

> select the size of the specialty media >

Letterhead

Send the copy job.

Copying on both sides of the paper (two

‑

sided)

Load an original document into the ADF tray or on the scanner glass.

From the home screen, touch

Copy

Paper Setup

Adjust the settings.

Send the copy job.

Copying

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands