Lexmark CX820 Series User Manual Download

Page: 39 / 199

Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service

Connect one end of the telephone cable to the line port of the printer.

Connect the other end of the telephone cable to an active analog wall jack.

Connect the telephone to the telephone port of the printer.

Notes:

•

This setup works best if you are using voice mail more often than fax, and if you subscribe to a
distinctive ring service.

•

When you answer the telephone and you hear fax tones, press

*9*

or the manual answer code on the

telephone to receive the fax.

•

You can also set the printer to receive faxes automatically, but turn off the voice mail service when you
are expecting a fax.

Faxing

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands