Lexmark CX820 Series, User Manual

Page: 33 / 199

E-mailing
Setting up the e
‑
mail function
1
From the home screen, touch Settings > Device > Preferences > Run Initial Setup .
2
Turn off the printer, wait for about 10 seconds, and then turn it back on.
3
From the Before You Begin screen, select Change the Settings and Continue with the Wizard .
4
From the Fax/Email Server Setup screen, enter the needed information.
5
Finish the setup.
Configuring e
‑
mail settings
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > E-mail .
3
Enter the needed information.
4
Apply the changes.
Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch E-mail , and then enter the needed information.
Note: You can also enter the recipient using the address book or shortcut number.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using the shortcut number
1
From the control panel, press # , and then enter the shortcut number using the keypad.
2
Send the e
‑
mail.
E-mailing 33