Lexmark CX820 Series User Manual Download | Manualshive

Page: 14 / 199

background image

Warning—Potential Damage:

Do not touch the USB cable, any wireless network adapter, or the printer in the

area shown while actively printing. Loss of data or a malfunction can occur.

Use the

To

1

EXT port

Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and
if this connection method is supported in your country or region.

Note:

Remove the plug to access the port.

2

LINE port

Connect the printer to an active telephone line through a standard wall jack (RJ

‑

11), DSL

ﬁlter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.

3

USB printer port

Connect the printer to a computer.

4

Ethernet port

Connect the printer to an Ethernet network.

5

USB ports

Attach a keyboard.

6

Printer power cord
socket

Connect the printer to a properly grounded electrical outlet.

Learning about the printer

14

«
...
12
13
14
15
16
...
»

Summary of Contents for CX820 Series








































































































































































































Reviews:

No comments

Related manuals for CX820 Series

Brand: Partner Pages: 9

WORKCENTRE 5050

Brand: Xerox Pages: 186

Brand: Canon Pages: 2

Brand: Canon Pages: 2

Brand: iDPRT Pages: 74

Brand: Memjet Pages: 181

ECOSYS FS-C5350DN

Brand: Kyocera Pages: 178

Brand: Oce Pages: 186

WorkCentre 7830

Brand: Xerox Pages: 12

Brand: Star Micronics Pages: 130

Brand: Lexmark Pages: 2

ECOSYS FS-C2126MFP

Brand: Kyocera Pages: 206

FX-980 - Impact Printer

Brand: Epson Pages: 72

Brand: Epson Pages: 2

Brand: Epson Pages: 2

FX-880 - Impact Printer

Brand: Epson Pages: 100

Brand: Epson Pages: 165

FX-286e - Impact Printer

Brand: Epson Pages: 173

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands