Lexmark CX820 Series User Manual Download

Page: 41 / 199

Connect the line port of the DSL ﬁlter to the wall jack.

Connect one end of the telephone cable to the line port of the printer. Connect the other end to the phone
port on the DSL ﬁlter.

To connect a telephone to the printer, remove any installed adapter plug from the telephone port of the
printer, and then connect the telephone.

Setting up fax using VoIP telephone service

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not use the fax feature during a

lightning storm.

Faxing

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands