4
In the window that appears, type a path to a solution file, or click
Browse
to browse to the solution file.
5
Click
Upload
.
Notes:
•
If you are upgrading an existing solution, then it is recommended that you set all servers offline so that jobs for
the solution are not accepted during the upgrade. Servers can be set online again after policy updates for the
associated device groups. For more information, see“Viewing and changing server status” on page 56.
•
If you install a workflow solution that includes a component, then you may need to restart the Lexmark
Solutions Application Server from the Windows Services control panel for the solution to fully function.
•
Solutions should be removed from home screens, device groups, and software client groups before removal. For
more information about removing solutions, see “Removing solutions” on page 93.
•
You can upload a solution to the Lexmark Intelligent Capture system directly from Eclipse by adding the solution
to the Lexmark Intelligent Capture System List.
Configuring global solution settings
1
Click the
Solutions
tab.
2
Select a solution name from the Solutions list.
3
Select
Configuration
from the Tasks list.
4
Adjust the settings for the solution as needed. For more information, see the documentation that came with the
solution.
Note:
When updating the shortcut number of a profile, make sure to match it with the shortcut number in the
Home Screen settings. For more information on configuring the home screen, see “Customizing the home
screen for a device group” on page 100.
5
Click
Apply
.
Editing local settings for a deployed or assigned solution
Local settings are configured during deployment or assignment of a solution.
1
Select a group:
a
Click the
Device Groups
tab.
b
Select a device group from the Device Groups list.
or
a
Click the
Software Client Groups
tab.
b
Select a software client group from the Software Client Groups list.
2
Select
Solutions
from the Tasks list.
3
Select a solution from the list in the main section, and then click
Edit
.
4
Configure the deployment settings of the solution for the current device group, and then click
Finish
.
Note:
A policy update is required after changing solution settings that affect a device group. For more information
see “Updating policies for device groups” on page 105.
Managing solutions
92
