Lexmark 634dte - X B/W Laser, Administrator'S Manual

Page: 90 / 148

4
Make sure the new server is selected from the Document Server list, and then click Next .
5
Select a profile on the server to use with the new port, and then click Next .
Note: If the server is currently running a large number of jobs, then profiles on the server may not appear in the
list. Wait until the server is not as busy, and then try adding the port again.
6
Click Finish to add the new port.
7
If you are using pooled ports, then add additional ports using the same server and profile.
8
If the Printer Ports dialog is still open, then click Close .
9
Make sure only newly created ports are selected, and then click Apply .
10
Do the following for each port associated with the failed load balancer:
a
Select the port from the list.
b
Click Delete , and then click Yes to confirm deletion.
Note: If a port cannot be deleted, then it may still be associated with the print queue. Make sure only newly
created ports are selected, then click Apply , and then try again.
11
If necessary, select newly created ports again.
12
Click Close .
Manually backing up databases
You can back up the Lexmark Intelligent Capture databases using any normal Firebird backup procedure. For manual
backups, you can use
GBAK.exe
, located in the \Lexmark\Solutions\firebird\bin\ folder within the folder where the
Lexmark Intelligent Capture load balancer or database is installed.
The following databases, located in the \Lexmark\Solutions\firebird\data\ folder within the folder where the Lexmark
Intelligent Capture database is installed, should be included in the backup:
• EFORMS.FDB
• FRAMEWORK.FDB
•
LICENSE.FDB
•
MONITOR.FDB
•
QUARTZ.FDB
•
SOLUTIONINFO.FDB
The user name for each database is
framework
, and the password is
rivet
.
The following command is recommended for each file:
LDD_folder \firebird\bin\gbak.exe -v -t -user framework -password rivet
" DB_IP_address : LDD_folder \firebird\data\ source_db " " backup_db "
Make the following replacements:
•
LDD_folder
—This is the folder where the Lexmark Intelligent Capture database is installed. This folder typically
starts with a prefix C:\Program Files\Lexmark\Solutions\.
•
DB_IP_address
—This is the IP address of the Lexmark Intelligent Capture database.
•
source_db
—This is the file name of the database file to back up.
•
backup_db
—This is the path and file name of the backup database file, which uses the extension .fbk.
Monitoring and maintaining the system 90