9
Select a profile on the server to use with the new port, and then click
Next
.
Notes:
•
Do
not
configure a Lexmark Intelligent Capture port on a print server to use a profile that prompts.
Prompting profiles should be used only on client computers.
•
Only profiles associated with solutions created for software clients are available.
•
Profiles used with the Lexmark Document Server Port must have a name with 14 characters or fewer.
•
If the server is currently running a large number of jobs, then profiles on the server may not appear on the
list. Wait until the server is not as busy, and then try adding the port again.
10
Click
Finish
to add the new port.
11
Select an existing print driver, and then click
Next
. For more information, see the documentation that came with
the printer or print driver.
12
If you are asked whether to keep the existing driver, then select
Keep existing driver (recommended)
, and then
click
Next
.
13
Type a printer name that describes the profile used with the new printer.
Select whether to use the new print queue as the default, and then click
Next
.
14
Select whether to share the new print queue. If you are installing the print queue on a server, then select
Share
name
, and then type a name to use for the print queue on the network.
15
Click
Next
.
16
Select
No
to skip printing a test page.
17
Confirm the settings for the new printer, and then click
Finish
.
18
After the printer has been added, right
‑
click it in the Printers control panel, and then click
Properties
.
19
Click the
Advanced
tab.
20
Select the
Spool print documents so program finishes printing faster
and the
Start printing after last page is
spooled
check boxes.
Note:
These settings are required in order to report an accurate page count to the Lexmark Intelligent Capture
system, which may be used by some solutions. Additionally, if a large job needs significant time to spool, smaller
jobs can still complete while the large job is spooling.
21
Click
OK
.
Managing software clients
116
