5
Type the UNC path of the existing network share (for example,
\\myserver\myshare\
) where the system
should be backed up.
Note:
When storing backup data from multiple Lexmark Intelligent Capture systems, make sure to assign a
different folder to each system. Assigning a backup folder for each Lexmark Intelligent Capture system prevents
an existing data from being overwritten by another system. This also helps you identify from which Lexmark
Intelligent Capture system the backup data belongs to.
6
If the network share requires authentication, then type the user name and password.
7
To back up the jobs list and the log, make sure the
Keep Jobs Logs Database
check box is selected.
8
To keep previous backup sets, make sure the
Keep previous backups
check box is selected. If this option is selected,
data from each backup is stored in a folder named with the date of the backup within the specified network share
folder. If it is cleared, backup data is stored directly in the specified network share folder, overwriting any previous
data.
Note:
The database containing the jobs list and the log may be very large. If both
Keep Jobs Logs Database
and
Keep previous backups
check boxes are selected, regularly make sure that you have enough space on the
network share where the files are backed up.
9
Click
Next
.
10
Enter a start date and a start time.
11
Configure the frequency of the scheduled event, and then click
Finish
.
Note:
When keeping previous backups, you can delete dated backup folders containing entire previous backups as
necessary, but do not modify the internal folder structure of backup data.
Recovering backup data with a new installation
When a recovery is necessary and you are using a network share backup, a new load balancer or database and load
balancer together can access backup data using Restore Install.
Note:
If only the load balancer has failed, then you can restore the load balancer by itself. However, if only the
database has failed, then you
must
restore the database, and then restore the load balancer as well.
1
Select the appropriate installation, proceeding to the final step of the installation wizard
without
clicking
Finish
:
•
If a workgroup system has failed, then perform a workgroup installation.
•
If the database and load balancer together or the database only has failed in an enterprise system, then install
the database.
•
If only the load balancer has failed in an enterprise system, then install the load balancer.
2
Select
Restore Install (RI)
.
3
Type the path of the folder containing the .ri file from the backup data.
or
Click the folder icon and then locate the .ri file from the backup data.
4
Click
Finish
to complete Restore Install.
5
If you are using an enterprise system and you just installed the database, then repeat steps 1 through 4 for the load
balancer.
Monitoring and maintaining the system
87
