Leviton NorthStar Site Controller User Manual Download Page 47 | Manualshive

Page: 47 / 65

background image

7 ADMINISTRATION

46

NorthStar is designed to require very little maintenance, but from time to time you may need
to reconﬁgure the system as your needs evolve.

7.1 NorthStar

User

Accounts

The NorthStar software supports multiple user accounts to provide you greater
security and ﬂexibility within your NorthStar installation.

7.1.1 The Accounts Management Page

All user account management is performed from the Accounts Management page.
The accounts management pane is visible only to users with Admin level access, and
is accessed via the User Name drop-down in the upper-right corner of the Title Bar.

The Accounts Management page is visible to users with the Manager and All Control
user roles, and provides the ability to change the password of their user account.

The Accounts Management page lists all conﬁgured user accounts and their
corresponding user role. Users with the Admin user role can add and delete users,
and edit the password and user role of any conﬁgured user.

7.1.2 User Roles

NorthStar supports four user roles that deﬁne how much access and control an
individual user has over the system. These roles are deﬁned per user account, and
are changed by an administrator via the

Edit User

button.

Admin -

Users with the Admin user role have full control of the NorthStar installation.

They can make changes to any account, including other accounts with the Admin
user role.

Manager -

Users with the Manager user role have full access and control within the

NorthStar system, except for the ability to create, edit, or delete user accounts. Users
with the Manager user role can change the password for their account, but cannot
affect other accounts.

All Control -

Users with the All Control user role have the same privileges as users

with the Manager user role, except for the ability to create, edit, or delete Lights,
Sensors, Scenes, Zones, and Scheduled Events.

Scene Control -

Users with the Scene Control user role can only view and activate

conﬁgured Scenes.

User Role

Add/Delete/Edit

Users;

Conﬁg Tab Control

Add/Delete/Edit

Lights, Sensors,

Scenes, Zones, and

Scheduled Events;

View Tab Control

Change

Account

Password

Control

Individual

Lights

View

Alarms

Apply

Scenes

Admin

D

D

D

D

D

D

Manager

D

D

D

D

D

All Control

D

D

D

D

Scene

Control

D

User Roles

WEB

VERSION

«
...
45
46
47
48
49
...
»

Summary of Contents for NorthStar Site Controller


































































Reviews:

No comments

Related manuals for NorthStar Site Controller

Brand: Access Pages: 12

Brand: K&K Pages: 6

Brand: Mackie Pages: 4

Brand: Maclaren Pages: 15

Brand: Maclaren Pages: 9

Brand: Maclaren Pages: 40

Brand: Magellan Pages: 44

Brand: Namron Pages: 3

Brand: Maclaren Pages: 43

Brand: Lawler Pages: 5

Brand: Valcom Pages: 3

Brand: Valcom Pages: 3

Brand: Valcom Pages: 2

Brand: Saluki Pages: 13

Brand: Osram Pages: 3

Brand: Parker Pages: 8

Brand: Global Fire Equipment Pages: 23

Brand: HOMIDO Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands