Leviton NorthStar Site Controller User Manual Download Page 53

Page: 53 / 65

7 ADMINISTRATION

7.4

Conﬁguring Ethernet Settings

If the NorthStar site controller is using the Ethernet port for connectivity, you can
conﬁgure it to use a static IP address, or a DHCP-assigned address, test Ethernet
connectivity, and view Ethernet network information via the

Ethernet Settings

tab

within the

Conﬁg

menu.

To view IP address related information:

Access the Ethernet Settings screen by clicking

Conﬁg - Ethernet Settings

All Ethernet-related information is displayed on the landing screen

To use DCHP-assigned IP addressing for site controller connectivity:

1. Access the Ethernet Settings screen by clicking

Conﬁg - Ethernet Settings

2. Under the Ethernet heading, click

DHCP

Click the

Save Changes

button to use

DHCP

addressing, or

Cancel

to exit

without changing settings.

To use a static IP address for site controller connectivity:

1. Access the Ethernet Settings screen by clicking

Conﬁg - Ethernet Settings

2. Under the Ethernet heading, click

Static

3. Enter the Static IP addressing for your network in the provided ﬁelds.

Click the

Save Changes

button to use static IP addressing, or

Cancel

to exit

without changing settings.

To test the site controller's IP connectivity:

1. Access the Ethernet Settings screen by clicking

Conﬁg - Ethernet Settings

2. Click the IP Connectivity Test button at the bottom of the screen.

WEB

VERSION

Summary of Contents for NorthStar Site Controller


































































Search results

Summary of Contents for NorthStar Site Controller

Reviews:

Related manuals for NorthStar Site Controller

Brands by name

Popular brands

Leviton NorthStar Site Controller, User Manual

Search results

Summary of Contents for NorthStar Site Controller

Reviews:

Related manuals for NorthStar Site Controller

Brands by name

Popular brands