Leviton NorthStar Site Controller User Manual Download Page 50 | Manualshive

Page: 50 / 65

background image

7 ADMINISTRATION

49

7.3

Working with Lights, Sensors, Zones, and Scenes

7.3.1 Editing a Light or Sensor Setting

To edit a light or sensor, ﬁnd it within its corresponding zone panel, and click the Edit
button on the right side of the panel.

NOTE:

Using the search ﬁeld provides an efﬁcient way of ﬁnding the speciﬁc light or

zone of interest. Simply start typing any unique identiﬁers for the light or zone and the
display will immediately update with the relevant results.

NOTE:

When editing a light, it is positioned or repositioned on the Map view by

dragging and dropping it on the map view on the right of the

Edit Light

page.

7.3.2 Deleting a Light or Sensor

To delete a light or sensor, click the three dots on the light or zone you wish to delete
and select the Delete Light button, or click the Delete Light button at the top of the
content area.

NOTE:

An unconﬁgured or deleted light will still respond to

Zone - All

commands if its

network settings match the network settings of the site controller.

WEB

VERSION

«
...
48
49
50
51
52
...
»

Summary of Contents for NorthStar Site Controller


































































Reviews:

No comments

Related manuals for NorthStar Site Controller

Brand: E-fly Pages: 16

Brand: Panasonic Pages: 45

Brand: Idesco Pages: 11

Brand: B meters Pages: 2

Brand: Valor Pages: 20

Brand: Cansec Pages: 45

Brand: Cansec Pages: 43

Brand: Cansec Pages: 32

Brand: ECKELMANN Pages: 178

Brand: echoflex Pages: 8

Brand: H3C Pages: 17

Brand: H3C Pages: 32

Brand: IDK Pages: 96

Brand: Lamtec Pages: 136

Brand: Zamel Pages: 2

Brand: Zamel Pages: 2

Brand: Zamel Pages: 2

Brand: Paradox Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands