Leviton NorthStar Site Controller User Manual Download Page 28

Page: 28 / 65

Sensor Fields are similar to Lighting ﬁelds, with only a few minor exceptions.

4 CONFIGURATION

Name

Description

Name*

The user deﬁned name of the sensor.

Sensor Type*

The function of the sensor. Acceptable types are Motion, Photocell, Switch (Pushbut-

ton), and Switch (Toggle).

A pushbutton switch provides a one-time change where the state of the device is not

persistent, while a toggle switch maintains a persistent state. For example, a light that

is controlled by a pushbutton switch will return to a default state after a power outage,

while a toggle switch will return to how it was set before the interruption.

SNAP Address*

The 6 digit SNAP Address for the light, in hex format. (For example, 1CD2E3.)

Controller Type*

The type of controller that the sensor is paired with.

Sensor Slot*

Index indicating which sensor on the controller this object applies to.

Sensor Description

A general description of the sensor.

Threshold High*

The signal level that, when exceeded, will trigger an "above threshold event," such as a

photocell triggering a light to turn off.

Threshold Low*

A signal level below this point will trigger a "below threshold event," such as a photocell

triggering a light to turn on.

Zone

The grouping of lights this sensor will control. All lights are always included in the "All"

group, and up to twenty additional zones may be conﬁgured. While a light may be part

of multiple zones, a sensor can only be in and control one zone.

Advanced

Jitter

A delay, in seconds, before this light applies a behavior. This is used in situations where

you do not want the sudden electrical current draw that is associated with turning on all

lights at one time, or for aesthetics (staggered on/off sequence).

Antenna

Compensation

Determines the power of communication signals transmitted from the Lighting Control-

ler. (Use 'North America' if you do not know what to use.)

Location Submenu

Latitude

The geographic latitude for the sensor.

Longitude

The geographic longitude for the sensor.

Location ID

A user deﬁned location id, such as pole number, ofﬁce number, etc.

Street Address

The street address where this sensor is located.

NorthStar Sensor Fields

WEB

VERSION

Summary of Contents for NorthStar Site Controller


































































Search results

Summary of Contents for NorthStar Site Controller

Reviews:

Related manuals for NorthStar Site Controller

Brands by name

Popular brands

Leviton NorthStar Site Controller, User Manual

Search results

Summary of Contents for NorthStar Site Controller

Reviews:

Related manuals for NorthStar Site Controller

Brands by name

Popular brands