Leviton NorthStar Site Controller User Manual Download Page 62 | Manualshive

Page: 62 / 65

background image

APPENDIX C: SITE CONFIGURATION USING A CSV FILE

61

If the Lighting Installer app isn't an option for you, the next most efﬁcient means of site
conﬁguration is a comma separated value (CSV) ﬁle. NorthStar can export an existing
lighting setup to CSV, which you then edit in a spreadsheet or text editor. Once new lights
are added in, you can import the CSV ﬁle with the new lights added.
For information on creating the initial CSV ﬁle, see Importing and Exporting Light
Conﬁgurations using a CSV File on page 58.

To conﬁgure a site using a CSV ﬁle:

1. Click

the

Export Lights

button to generate the initial CSV ﬁle.

2.

Open the CSV ﬁle. You'll notice 12 column headings corresponding to the
conﬁguration information for lighting controllers.

* Indicates a Required Field
NOTE:

Field names don't necessarily correspond to what is in the user interface.

3.

Enter each new light as a separate row in the CSV ﬁle. When all lights are entered,
save the ﬁle, click the Import Lights button, and follow the on-screen instructions to
upload the new lights.

Field Name

Description

Acceptable Input Values

* name

The user deﬁned name of the light.

A string of characters

* snapaddr

The 6 or 16 digit SNAP Address for the light, in hex format.

(For example, 1cd2e3 or 001c2c1b2606e458.)

Six hex characters

* type

The type of light controller that is being conﬁgured.

OCF00-1RN

OCF01-10T

OCF01-1RT

description

A general description of the light.

A string of characters.

zones

The groups this light is included in. All lights are always

included in the "All" group. Up to eight additional zones

may be conﬁgured.

List Zone names separated

by the | character. For

example: Zone 1|Zone 2

* power_on_

level

The brightness level for the light when power is cycled,

provided the light supports dimming.

A number, 1 - 100 (Default

is 100)

* slot

Reserved for future use.

0

y

The geographic latitude for the light.

A single longitude entry

x

The geographic longitude for the light.

A single latitude entry

location_id

A user deﬁned location id, such as pole number, ofﬁce

number, etc.

A string of characters

street_ address

The street address where this light is located.

A string of characters

* antenna_

compensation

Determines the power of communication signals

transmitted from the Lighting Controller. (Use 'North

America' if you do not know what to use.)

North America CE

ﬁxture_type_

name

Fixture types represent a driver controller/driver/light

combination. When you create a ﬁxture type, you can

assign NorthStar to monitor for a speciﬁed range of

conditions and generate alarms when conditions deviate

above or below those conditions.

A string of characters

CSV File Fields

WEB

VERSION

«
...
60
61
62
63
64
...
»

Summary of Contents for NorthStar Site Controller


































































Reviews:

No comments

Related manuals for NorthStar Site Controller

Leroy-Somer R180

Brand: Nidec Pages: 20

imageRUNNER ADVANCE C9075S PRO

Brand: Canon Pages: 20

Brand: FAAC Pages: 12

Brand: Saitek Pages: 44

Brand: Eaton Pages: 288

Brand: YOKOGAWA Pages: 2

ALICAT SCIENTIFIC PC

Brand: Halma Pages: 2

ALICAT SCIENTIFIC PCD

Brand: Halma Pages: 46

Brand: LAE electronic Pages: 7

Brand: LAE electronic Pages: 2

Brand: Saab Pages: 4

U1000 iQpump Drive

Brand: YASKAWA Pages: 426

Brand: YASKAWA Pages: 26

Brand: YASKAWA Pages: 210

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 400

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 466

Brand: Fox Pages: 5

Travel About Series

Brand: Kolcraft Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands