Leviton MLC16 User Manual Download Page 10

Page: 10 / 70

User Guide

Page 4 of 62

Leviton MLC 16D Motorized Lighting Controller

•

Solo button.

Blacks out all fixtures except the one selected. Push the button

again to return the blacked out fixtures to their proper intensities.

•

Copy button.

Copies the values of one fixture to another fixture of the same

type.

•

Default button.

When a fixture is selected, sets all parameters to the default

values assigned to that fixture personality.

•

Playback buttons (1-24).

Allow you to select scenes, patterns, and shows for

programming or playback. Use the

Scene

Page 1-4

and

Show

buttons to

select the mode of the

Playback

buttons.

•

Scene button.

Places the 24

Playback

buttons in Scene mode, for selecting or

programming scenes.

•

Pattern Page buttons (1-4).

Places the 24

Playback

buttons in Pattern mode,

for selecting or programming patterns.

•

Show button.

Places the 24

Playback

buttons in Show mode, for selecting or

programming shows.

•

Function buttons (1-4).

Allow you to select items that appear on the LCD

display.

•

Modify wheels.

Allow you to make changes to the items on the LCD display.

•

LCD Contrast adjust.

The small hole located between Modify wheels 2 and 3

allows you to adjust the contrast of the LCD display. Use a small flat-blade

screwdriver to carefully make adjustments.

•

More

button.

Provides access to additional fixture traits and menu options.

Holding down this button deactivates all of a selected fixture's traits.

•

Record button.

Initiates programming of scenes, patterns, and shows.

•

Edit button.

Allows you to edit fixtures, patterns, shows, and Console Setup

menus, and exits the menus.

•

Blind button.

Allows you to modify a fixture

in the blind, indicated when the

Blind LED is on. Changes made to the fixture will not appear on stage until the

button is pressed. The Blind function is not available in

playback edit and

record modes.

•

Go button.

Advances manually stepped Patterns. If the Blind function is active,

tapping the

button transfers any fixture changes made in the blind to the

stage.

•

Hold button.

Holds the current look in a pattern or show.

•

Tap Sync button.

Overrides any preprogrammed step times at the rate the

button is tapped.

•

Audio Sync button.

Allows audio input to override the preprogrammed step

times.

•

Blackout button.

Blacks out all fixtures to their programmed blackout values

and exits the menus.

•

Joystick.

Controls the pan and tilt of fixtures.

•

Worklight.

A BNC connector is provided for powering a standard worklight.

If you encounter a problem with a front panel control, you can place the

console in Panel Test mode, which runs a diagnostic routine for

debugging the front panel hardware.

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands