Leviton MLC16 User Manual Download Page 29

Page: 29 / 70

User Guide

Leviton MLC 16D Motorized Lighting Controller

Page 23 of 62

Programming

Overview

Once you have assigned your devices and groups, you can record scenes,

patterns, and shows.
All programming is stored in non-volatile memory which retains information for at

least 10 years even when power is removed.
When recording scenes or patterns you must decide whether to record in All Traits

mode or Selective Traits mode.

All Traits Mode

When using the All Traits mode to record, the console records the full range of

available control channels (see “Setting the Maximum Dimmers” on page 14) into

that scene or pattern. This is the easiest mode for operating the console. Do not

use this recording mode if you plan to record multiple scenes into one pattern

step, or if you plan to run multiple scenes or patterns simultaneously.

Selective Traits Mode

When using the Selective Traits mode to record, only channels that are captured

or active are recorded into scenes and patterns. Use this recording mode to layer

multiple scenes into a pattern step. You can also use this recording mode to

create palettes or templates of individual traits like color or gobo that may be

activated while playing back another scene, pattern, or show to capture specific

traits.

Once the Trait Record mode is set to

All

Select

, the console stays in

that mode until you turn the power off or until the mode is changed. The

factory default setting is

All

Recording Scenes

Scenes can be used by themselves as a static look, or as building blocks for

creating patterns.

Recording Scenes in All Traits Mode

To record a scene in All Traits mode:

Set the desired look on stage, using the Fixture or Group controls and any

previously recorded scenes.

Press the

Record

button.

Press

, above

Scene

Turn Modify wheel 1 to select the scene to be recorded.

Turn Modify wheel 3 to set a fade time if desired.

Note:

This fade time will not override the master fade rate on the MLC 16

Main Screen unless you press and hold

while playing back or

activating a scene with a fade time.

Turn Modify wheel 4 to select

<All>

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands