Leviton MLC16 User Manual Download Page 23

Page: 23 / 70

User Guide

Leviton MLC 16D Motorized Lighting Controller

Page 17 of 62

Turn Modify wheel 4 to select

<Save>

<Cancel>

Press

, above

<Save>

<Cancel>

The action is saved or cancelled.

Press

Blackout

Edit

to exit the Mouse Resolution menu.

Entering Channel Test Mode

Channel Test mode allows you to control output channels directly. This is useful

when the traits of a fixture are not known or if index values need to be

determined.
To change the mouse resolution:

Press

Edit

Press

, above

Setup

Press

, above

Fixture

Press

, above

Test

Press

through

, until you find the DMX output channel of the fixture

you want to test.

Note:

Use

and

to decrease and increase the output channel

numbers by 1. Use

and

to decrease and increase the output

channel numbers by 10.

Turn Modify wheels 1 through 4 to vary the level of the output channels

above them.

Press

Blackout

Edit

to exit the Test mode menu.

Clearing and Initializing Memory

You can clear all or parts of the console's flash memory.

Clearing Scenes, Patterns, and Shows

To clear scenes, patterns, and shows:

Press

Edit

Press

, above

Setup

Press

, above

Console

Press

More

six times.

Press the

Function

button above the desired option.

Choose

Clear All

to clear all scenes, patterns, and shows.

Choose

Clear Scene

to clear all scene memory.

Choose

Clear Pattern

to clear all pattern memory.

Choose

Clear Show

to clear all show memory.

A confirmation menu appears for each of the options.

Press

, above

Yes

, to clear or initialize the memory,

or press

, above

, to return to the Memory menu.

Press

Blackout

Edit

to exit the Memory menu.

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands