Leviton MLC16 User Manual Download Page 25

Page: 25 / 70

User Guide

Leviton MLC 16D Motorized Lighting Controller

Page 19 of 62

Refer to the “ASCII Formatting Guide” on page 36 for an explanation of the syntax

of the ASCII formatted files.

Formatting a Disk

This utility allows you to format a new disk as an MSDOS compatible disk.

Most disks sold are preformatted and will not require this operation.

To format a disk:

Press

Edit

Press

, above

Setup

Press

, above

Disk

Press

, above

Format

A confirmation menu appears.

Press

, above

Yes

, to format the disk,

or press

, above

, to return to the Disk menu.

When formatting is complete, the console returns to the Disk menu.

Press

Blackout

Edit

to exit the Disk menu.

Deleting Files on a Disk

This utility allows you to clean up a disk, deleting individual files.
To delete files on a disk:

Press

Edit

Press

, above

Setup

Press

, above

Disk

Press

, above

Delete

Once the file directory is loaded, the Disk Delete menu appears.

Turn Modify wheel 2 or 3 to move through the list of available files.

Turn Modify wheel 4 to select

<Save>

<Cancel>

Press

, above

Select <OK>

, to delete the file,

or Press

, above

Select <Cancel>

, to return to the Disk menu.

If you selected

<OK>

, a confirmation menu appears to confirm your

request.

Turn Modify wheel 4 to select

<Save>

<Cancel>

Press

, above

Select <OK>

, to delete the file,

or Press

, above

Select <Cancel>

, to return to the Disk menu.

Press

Blackout

Edit

to exit the Disk menu.

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands