Leviton MLC16 User Manual Download Page 32

Page: 32 / 70

User Guide

Page 26 of 62

Leviton MLC 16D Motorized Lighting Controller

Turn Modify wheel 4 to select

Fullstep

Scnstep

Note:

In All Traits mode you can only record Fullsteps. In Selective Traits

mode each pattern step can have up to ten scenes layered together.

Turn Modify wheel 2 to select the desired scene.

Note:

In Scene Step mode, turn Modify wheel 1 to select

Count 2

, and

enter the next scene; continue until you have entered the desired number

of scenes.

Press the

More

buttons, then press

, above

Rec

, or press the

Record

button.

The step is recorded.

Record more steps, following this procedure.

When finished, press the

Blackout

Edit

button to exit Record mode.

Recording Patterns Using Manual Control

To record a pattern using manual (live) control of the device:

Press the

Record

button.

The LED on the button lights, and you enter Record mode.

Press

, above

Pattern

Turn Modify wheel 1 to select the pattern to be recorded.

Turn Modify wheel 4 to select the recording mode,

Select

All

traits.

Press

, above

Traits

Turn Modify wheels 1, 2, and 3 to modify the fade, hold, and delay times.

Press any of the

Fixture

Group

buttons for the desired device or

group.

Press the

Select

button for the desired device or group.

The LCD display shows the traits, and you have control of the fixture(s).

Note:

In the Selective Traits mode, only those traits captured (indicated

by an asterisk beside a trait value when a device is selected) will be

recorded. Whenever a device is selected with no pattern or show active,

all traits for that device are immediately captured.

Set the desired look on stage with all necessary groups and devices.

Press the

Record

button.

Repeat the previous two steps to record more pattern steps.

When finished, press the

Blackout

Edit

button to exit Record mode.

Editing Patterns

You can edit patterns to modify the scenes they contain, as well as fade, hold,

and delay times of each step, or insert or remove pattern steps.
To edit a pattern:

Press the

Edit

button.

Press

, above

Pattern

Turn Modify wheel 1 to select the pattern to be edited.

Press

, above

Select

Edit

Turn Modify wheel 4 to select the pattern step to edit.

Turn Modify wheels 1, 2, and 3 to modify the fade, hold, and delay times.

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands