Leviton MLC16 User Manual Download Page 13

Page: 13 / 70

User Guide

Leviton MLC 16D Motorized Lighting Controller

Page 7 of 62

Using the Worklight

A BNC connector is provided for powering a standard worklight. The connector

provides 12 VDC at 1A. Since the light is powered by the same supply that

provides power to the isolated DMX 512 circuit, the metal portion of the

gooseneck and lamp should not be allowed to touch the chassis ground or other

metal objects, to prevent DMX 512 interference. The lamp power is protected by

an internal fuse that will interrupt power to the lamp while retaining isolated

DMX 512 power in case of a lamp short. Consoles equipped with a Revision C or

above processor card include a built-in dimmer for varying the worklight intensity.

The dimmer control is accessed from the main menu using Modify wheel 1. F1

changes Modify wheel 1 operation from Scene fade

(Fd:)

to Worklight Dimmer

(Wk:)

. The dimmer can be varied from 0 to 100%.

Configuration

Enabling Safety Locks

The MLC 16D console allows you to set three safety locks:

•

Record lock.

Disables the

Record

button and prevents recording and editing of

scenes, patterns, and shows.

•

Setup lock.

Prevents access to the Setup menus or the RS-232, fixture, and

console functions. The default code is

abcd

•

Fixture lock.

Prevents access to the Fixture Define functions. The default code

abcd

To enable safety locks:

Press the

Edit

button.

Press

, above

Setup

Press

, above

Console

Press the

More

button 5 times.

Press

, above

Edit

Turn Modify wheel 1, below

Rec

to select

Yes

, enabling the Record lock.

Turn Modify wheel 2, below

Setup

, to select

Yes

, enabling the Setup

lock.

Turn Modify wheel 3, below

Fix

, to select

yes

, enabling the Fixture lock.

Turn Modify wheel 4 to alternate between

<Save>

and

<Cancel>

Press

, above

<Save>

<Cancel>

, to enable or cancel changes to

the locks.

When any of the safety locks are enabled, you will be prompted to enter the lock

code when attempting to access the buttons or functions.

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands