Leviton MLC16 User Manual Download Page 34

Page: 34 / 70

User Guide

Page 28 of 62

Leviton MLC 16D Motorized Lighting Controller

Press the

Hold

button to start the selected pattern running.

A timer on the LCD display starts to run.

When it is time to move to the next step, press the

Hold

button again.

The elapsed time will be used to relatively modify the stored times.

Continue this process until you have gone through all the steps.

The Real Time Recording mode ends once the last step is complete.

Recording Shows

You can link together patterns that have been recorded into the console to form

shows. You can record 256 shows.
To record a show:

Press the

Record

button.

Press

, above

Show

Turn Modify wheel 1 to select the Show number.

Turn Modify wheel 2 to select the number of loops to be played.

Note:

You can set 1-250 loops, or infinite loops.

Turn Modify wheel 4 to select

New

Press

, above

Select

Turn Modify wheel 2 to select a pattern for Step 1.

Turn Modify wheel 3 to select the number of loops for that pattern.

Turn Modify wheel 4 to select

Save

Cancel

, or

Exit

Choose

<Save>

to save the current show step.

Choose

<Cancel>

to return the values to their original state.

Choose

<Exit>

to return to the previous menu.

Press

, above

Select

Repeat steps 7-10 until you have selected all the desired patterns.

Press the

Blackout

button to exit Record mode.

Editing Shows

To edit a show:

Press the

Edit

button.

Press

, above

Show

Turn Modify wheel 1 to select the show to be edited.

Turn Modify wheel 4 until the LCD display shows

Edit

or press

to view the steps in the pattern.

Press

, above

Select

<Edit>

Turn Modify wheel 1 to select the show step or pattern to edit.

Summary of Contents for MLC16







































































Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands

Leviton MLC16, User Manual

Search results

Summary of Contents for MLC16

Reviews:

Related manuals for MLC16

Brands by name

Popular brands