LevelOne GNS-4000 User Manual Download Page 153

Page: 153 / 168

143

10. Maintenance

10.1. Upgrading the Firmware

Follow this procedure to upgrade the firmware on your Network Storage.

Downloading the Upgrade File

To download the upgrade file:

1. Download the latest firmware upgrade file from the LevelOne website onto

your PC.

2. Copy the firmware upgrade file from your PC to a folder on the Network

Storage.

Installing the Upgrade File

1. Start the ASM interface.

2. In the Tree, click on the

beside the Management icon.

3. Click on the System Upgrade icon.

4. From the Volume dropdown menu, choose the Volume that has the folder

with the firmware image file.

5. From the Folder dropdown menu, choose the Folder that contains the

firmware upgrade file.

6. In the File Name field, type the name of the firmware upgrade file.

7. Click

the

button to begin the upgrade.

The upgrade take about two to three minutes.

Warning

Do not disconnect the power or shut down the Network Storage
while the upgrade is running!

When the upgrade is done, a system message appears.

8. Click

the

button on the system message.

Summary of Contents for GNS-4000









































































































































































Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands

LevelOne GNS-4000, User Manual

Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands