153
If your FTP client does not support Unicode, only use ASCII characters to
name your shared folders on Network Storage.
I cannot find the DLNA Server tab under Protocol Control in ASM.
You must download and install the DLNA plug-in on your Network Storage
to access this feature. See “Installing Application Plug-ins” Section.
Can I move the disk drives from one Network Storage to a different Network
Storage?
Yes. However, to access the RAID Volume on the new Network Storage,
you must run the Recover function. When Network Storage’s memory
does not match the RAID Volume on the disk drives, the RAID Volume is
considered
invalid
and the Recover function becomes available. See
“Responding to an Invalid RAID Volume” Section.
I set up email alert recipients but they never receive any messages.
In most cases, you must setup SMTP authentication in order for your alert
messages to pass your SMTP server. See “Setting up SMTP
Authentication” on page 90.
Can Network Storage handle jumbo frames?
Yes. But you must set the maximum frame size in ASM. See “Working with
Jumbo Frames” Section
