144
Rebooting the Network Storage
To reboot the Network Storage after a firmware upgrade:
1. In the Tree, click on the
+
beside the System icon.
2. Click on the Reboot / Shutdown icon.
3. Click on the Reboot option.
4. Click
the
OK
button.
5. In the confirmation box, click the
OK
button.
The reboot runs automatically. When the Network Storage is
fully booted:
•
The System Status LED turns green (right)
•
The buzzer beeps one time (if the buzzer is enabled)
10.2. Installing Application Plug-ins
Application plug-ins are enhancements to Network Storage’s capabilities. The
DLNA server, which enables Network Storage to support the UPnP protocol, is
one example of an application plug-in.
Follow this procedure to install an application plug-in on your Network Storage.
Downloading the Plug-in File
To download the plug-in file:
1. Download the plug-in file you want from the LevelOne website onto your
PC.
2. Copy the plug-in file from your PC to a folder on the Network Storage.
Installing the Plug-in File
1. Start the ASM interface.
2. In the Tree, click on the
+
beside the Management icon.
3. Click on the System Upgrade icon.
4. From the Volume dropdown menu, choose the Volume that has the folder
with the plug-in file.
5. From the Folder dropdown menu, choose the Folder that contains the
plug-in file.
6. In the File Name field, type the name of the plug-in file.
7. Click
the
OK
button to begin the installation.
System
Status LED
