LevelOne GNS-4000 User Manual Download Page 25

Page: 25 / 168

Click the Advanced Mode option if one or more of these conditions apply:

You do not have a DHCP server on your network.

You have a DHCP server but no addresses are available.

You want to set the IP address manually.

You want maximum capacity RAID 0 Volume.

You want to set date and time manually.

The rest of the setup instructions describe Express mode. For setup
instructions using Advanced mode, see “Appendix A: Setup Wizard Advanced
Mode”

4. Click

Next >>

to continue.

The Discovering LevelOne NAS screen appears. The Network Storage is
listed as a GNS-4000.

Highlight the Network Storage you are initiating, then click

Next >>

to continue.

Summary of Contents for GNS-4000









































































































































































Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands

LevelOne GNS-4000, User Manual

Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands