LevelOne GNS-4000 User Manual Download Page 134

Page: 134 / 168

124

Reported Event

Corrective Action

RAID Volumes

Create [RAID name, RAID
level and X number of disk
drives]

Create a RAID Volume. Normal.

Delete RAID X

Delete a RAID Volume. Normal.

Migration or Rebuilding on
array X started.

RAID Volume Migration or Rebuild has started. Normal.

Migration or Rebuilding on
array X at Y%.

Progress report on RAID Volume Migration or Rebuild.
Normal.

Migration or Rebuilding on
array X paused at Y%.

RAID Volume Migration or Rebuild was paused temporarily
by user action.

Migration or Rebuilding on
array X resumed at Y%.

RAID Volume Migration or Rebuild was paused and then
resumed by user action.

Migration or Rebuilding on
array X completed.

RAID Volume Migration or Rebuild has finished. Normal.

Migration or Rebuilding on
array X aborted at Y%

RAID Volume Migration or Rebuild was aborted (stopped)
by user action.

Migration or Rebuilding on
array X aborted at Y%
because of error.

RAID Volume Migration or Rebuild has aborted (stopped)
because of an error. Check the disk drives. Check the RAID
Volume.

RAID status: "OFFLINE".
The GNS-4000 X volume Y
is offline.

Check the disk drives. Replace the failed drive. Create a
new RAID Volume.

RAID status: "CRITICAL".
The GNS-4000 X volume Y
is not functioning correctly.

Check the disk drives. Replace the failed drive. The RAID
Volume will rebuild automatically.

RAID X had some errors.
Formatting was aborted!

Check the disk drives. Replace the failed drive.

Summary of Contents for GNS-4000









































































































































































Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands

LevelOne GNS-4000, User Manual

Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands