125
8.7. Checking Enclosure Status in ASM
To check Enclosure status:
1. Start
ASM.
2. In the Tree, click on the
+
beside the System icon.
3. Click on the System Information icon.
4. Click on the Enclosure Information tab.
The corrective action you take depends on the nature of the problem:
•
If CPU or system temperature is above specification:
•
Be sure there is adequate air flow around the Network Storage.
•
Be sure the ambient temperature is below 35ûC (95ûF).
•
Check the fan speed.
•
If the fan speed is below specification, replace the Network Storage’s disk
drive cooling fan.
•
If any power status is out-of-specification, replace the Network Storage’s
power supply.
Overheat icon
Failed Fan icon
Out-of-spec
Power icon
