145
Warning
Do not disconnect the power or shut down the Network Storage
while the installation is running!
When the installation is done, a system message appears.
8. Click
the
OK
button on the system message.
Rebooting the Network Storage
To reboot the Network Storage after a plug-in installation:
1. In the Tree, click on the
+
beside the System icon.
2. Click on the Reboot / Shutdown icon.
3. Click on the Reboot option.
4. Click
the
OK
button.
5. In the confirmation box, click the
OK
button.
The reboot runs automatically. When the Network Storage is
fully booted:
•
The System Status LED turns green (right)
•
The buzzer beeps one time (if the buzzer is enabled)
10.3. Replacing the Fan
Follow this procedure to replace the disk drive cooling fan on the Network
Storage:
Shutdown and Disconnect
1. In the Tree, click on the
+
beside the System icon.
2. Click on the Reboot / Shutdown icon.
3. Click the Shutdown option, then click the
OK
button.
4. In the confirmation box, click the
OK
button.
Wait until the LEDs on the front of the Network Storage go dark.
5. Disconnect the power cord, network cable, and USB cable.
System
Status LED
