LevelOne GNS-4000 User Manual Download Page 143

Page: 143 / 168

133

9. Setup Wizard Advanced Mode

The NAS Setup Wizard performs the setup procedures on your Network
Storage.

To set up your Network Storage:

1. From the Windows Start menu, choose

Programs

, then

LevelOne NAS

Utility

, and then

NAS Setup Wizard

The NAS Setup Wizard welcome screen appears.

2. From the Choosing a language dropdown menu, choose the language you

prefer.

3. Choose an Initiation Mode.

Click the

Express Mode

option if ALL of these conditions apply:

•

You have a DHCP server on your network with addresses available.

•

You want data protection for your disk array.

•

You want to use date and time settings from your PC.

Express Mode is recommended for most users.

Click the

Advanced Mode

option if one or more of these conditions apply:

•

You do not have a DHCP server on your network.

•

You have a DHCP server but no addresses are available.

•

You want to set the IP address manually.

Summary of Contents for GNS-4000









































































































































































Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands

LevelOne GNS-4000, User Manual

Search results

Summary of Contents for GNS-4000

Reviews:

Related manuals for GNS-4000

Brands by name

Popular brands