LevelOne GEL-1061 User Manual Download Page 95

Page: 95 / 500

– 95 –

Interface Configuration

This chapter describes the following topics:

◆

Port Configuration

– Configures connection settings, including auto-

negotiation, or manual setting of speed, duplex mode, and flow control.

◆

Displaying Statistics

– Shows Interface, Etherlike, and RMON port statistics in

table or chart form.

◆

Displaying Statistical History

– Displays statistical history for the specified

interfaces.

◆

Displaying Transceiver Data

– Displays identifying information, and operational

parameters for optical transceivers which support DDM.

◆

Configuring Transceiver Thresholds

– Configures thresholds for alarm and

warning messages for optical transceivers which support DDM.

◆

Trunk Configuration

– Configures static or dynamic trunks.

◆

Saving Power

– Adjusts the power provided to ports based on the length of the

cable used to connect to other devices.

◆

Local Port Mirroring

– Sets the source and target ports for mirroring on the local

switch.

◆

Remote Port Mirroring

– Configures mirroring of traffic from remote switches

for analysis at a destination port on the local switch.

◆

Traffic Segmentation

– Configures the uplinks and down links to a segmented

group of ports.Port Configuration

Summary of Contents for GEL-1061





















































































































































































































































































































































































































































































































Search results

Summary of Contents for GEL-1061

Reviews:

Related manuals for GEL-1061

Brands by name

Popular brands

LevelOne GEL-1061, User Manual

Search results

Summary of Contents for GEL-1061

Reviews:

Related manuals for GEL-1061

Brands by name

Popular brands