LevelOne GEL-1061, User Manual

Page: 74 / 500

Chapter 3
| Basic Management Tasks
Managing System Files
– 74 –
directory name must be separated from the host, and in nested directory
structures, from the parent directory, with a prepended forward slash “/”.
■
/ – The forward slash must be the last character of the URL.
Examples
The following examples demonstrate the URL syntax for a TFTP server at IP
address 192.168.0.1 with the operation code image stored in various locations:
■
tftp://192.168.0.1/
The image file is in the TFTP root directory.
■
tftp://192.168.0.1/switch-opcode/
The image file is in the “switch-opcode” directory, relative to the TFTP root.
■
tftp://192.168.0.1/switches/opcode/
The image file is in the “opcode” directory, which is within the “switches”
parent directory, relative to the TFTP root.
The following examples demonstrate the URL syntax for an FTP server at IP
address 192.168.0.1 with various user name, password and file location options
presented:
■
ftp://192.168.0.1/
The user name and password are empty, so “anonymous” will be the user
name and the password will be blank. The image file is in the FTP root
directory.
■
ftp://switches:upgrade@192.168.0.1/
The user name is “switches” and the password is “upgrade”. The image file is
in the FTP root.
■
ftp://switches:upgrade@192.168.0.1/switches/opcode/
The user name is “switches” and the password is “upgrade”. The image file is
in the “opcode” directory, which is within the “switches” parent directory,
relative to the FTP root.
Web Interface
To configure automatic code upgrade:
1.
Click System, then File.
2.
Select Automatic Operation Code Upgrade from the Action list.
3.
Mark the check box to enable Automatic Opcode Upgrade.