LevelOne GEL-1061 User Manual Download Page 49

Page: 49 / 500

Chapter 2

| Using the Web Interface

Navigating the Web Browser Interface

– 49 –

Mirror

129

Add

Sets the source and target ports for mirroring

129

Show

Shows the configured mirror sessions

129

RSPAN

Mirrors traffic from remote switches for analysis at a destination port on
the local switch

130

Traffic Segmentation

135

Configure Global

Enables traffic segmentation globally

135

Configure Session

Configures the uplink and down-link ports for a segmented group of
ports

136

VLAN

Virtual LAN

139

Static

142

Add

Creates VLAN groups

142

Show

Displays configured VLAN groups

142

Modify

Configures group name and administrative status

142

Edit Member by VLAN

Specifies VLAN attributes per VLAN

144

Edit Member by Interface

Specifies VLAN attributes per interface

144

Edit Member by Interface Range

Specifies VLAN attributes per interface range

144

Protocol

148

Configure Protocol

149

Add

Creates a protocol group, specifying supported protocols

149

Show

Shows configured protocol groups

149

Configure Interface

150

Add

Maps a protocol group to a VLAN

150

Show

Shows the protocol groups mapped to each VLAN

150

MAC-Based

152

Add

Maps traffic with specified source MAC address to a VLAN

152

Show

Shows source MAC address to VLAN mapping

152

MAC Address

155

Dynamic

Configure Aging

Sets timeout for dynamically learned entries

159

Show Dynamic MAC

Displays dynamic entries in the address table

159

Clear Dynamic MAC

Removes any learned entries from the forwarding database and clears
the transmit and receive counts for any static or system configured
entries

161

Learning Status

Enables MAC address learning on selected interfaces

155

Table 4: Switch Main Menu

(Continued)

Menu

Description

Page

Summary of Contents for GEL-1061





















































































































































































































































































































































































































































































































Search results

Summary of Contents for GEL-1061

Reviews:

Related manuals for GEL-1061

Brands by name

Popular brands

LevelOne GEL-1061, User Manual

Search results

Summary of Contents for GEL-1061

Reviews:

Related manuals for GEL-1061

Brands by name

Popular brands