LevelOne GEL-1061 User Manual Download Page 476

Page: 476 / 500

Appendix A

| Software Specifications

Management Features

– 476 –

VLAN Support

Up to

4094

groups; port-based, protocol-based, tagged (802.1Q),

voice VLANs, MAC-based

Class of Service

Supports four levels of priority

Strict, Weighted Round Robin (WRR), or a combination of strict and weighted queueing

Layer 3/4 priority mapping: IP DSCP

Quality of Service

DiffServ

supports class maps, policy maps, and service policies

Multicast Filtering

IGMP Snooping (Layer 2 IPv4)

MLD Snooping (Layer 2 IPv6)

IP Routing

ARP, CIDR (Classless Inter-Domain Routing)

Additional Features

BOOTP Client

DHCP Client, Option 82,

LLDP (Link Layer Discover Protocol)

RMON (Remote Monitoring, groups 1,2,3,9)

SMTP Email Alerts

SNMP (Simple Network Management Protocol)

SNTP (Simple Network Time Protocol)

Management Features

In-Band Management

Telnet, web-based HTTP or HTTPS, SNMP manager, or Secure Shell

Out-of-Band

Management

RS-232 DB-9 console port

Software Loading

HTTP or TFTP in-band, or XModem out-of-band

SNMP

Management access via MIB database

Trap management to specified hosts

RMON

Groups 1, 2, 3, 9 (Statistics, History, Alarm, Event)

12. Only supported for IPv4.

Summary of Contents for GEL-1061





















































































































































































































































































































































































































































































































Search results

Summary of Contents for GEL-1061

Reviews:

Related manuals for GEL-1061

Brands by name

Popular brands

LevelOne GEL-1061, User Manual

Search results

Summary of Contents for GEL-1061

Reviews:

Related manuals for GEL-1061

Brands by name

Popular brands