manualshive.com logo in svg

LevelOne GEL-1061, User Manual

The LevelOne GEL-1061 is a high-quality wireless router designed to provide reliable and fast internet connectivity. For those in need of guidance on setup and operation, a comprehensive User Manual is available for free download from our website. Simply visit manualshive.com to access the manual and optimize your router experience.

Share
Download
background image

Chapter 13

  |  Basic Administration Protocols

LBD Configuration

–  391  –

◆

Trap

 – Sends a trap when a loopback condition is detected, or when the switch 

recovers from a loopback condition. (Options: Both, Detect, None, Recover; 
Default: None)

■

Both

 – Sends an SNMP trap message when a loopback condition is 

detected, or when the switch recovers from a loopback condition.

■

Detect

 – Sends an SNMP trap message when a loopback condition is 

detected.

■

None

 – Does not send an SNMP trap for loopback detection or recovery.

■

Recover

 – Sends an SNMP trap message when the switch recovers from a 

loopback condition.

◆

Release

 – Releases all interfaces currently shut down by the loopback 

detection feature.

Web Interface

To configure global settings for LBD:

1.

Click Administration, LBD, Configure Global.

2.

Make the required configuration changes.

3.

Click Apply.

Figure 256:  Configuring Global Settings for LBD

Summary of Contents for GEL-1061





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GEL-1061

Cables to Go 40020 Instruction Manual preview
40020
Brand: Cables to Go Pages: 4
Brightlink 16x16 Manual preview
16x16
Brand: Brightlink Pages: 33
Gavita RS1 User Manual preview
RS1
Brand: Gavita Pages: 12
NETGEAR ProSafe GS104 Installation Manual preview
ProSafe GS104
Brand: NETGEAR Pages: 8
FS IES3110-8TF Quick Start Manual preview
IES3110-8TF
Brand: FS Pages: 33
PRO SIGNAL PSG08229 Quick Start Manual preview
PSG08229
Brand: PRO SIGNAL Pages: 2
Lantech IPES-3408GSFP User Manual preview
IPES-3408GSFP
Brand: Lantech Pages: 119
Gembird UHB-U3P1U2P3P-01 User Manual preview
UHB-U3P1U2P3P-01
Brand: Gembird Pages: 2
Velux INTEGRA KLI 310 Quick Start Manual preview
INTEGRA KLI 310
Brand: Velux Pages: 9
Bluestream Custom Pro Matrix User Manual preview
Custom Pro Matrix
Brand: Bluestream Pages: 27
Omron B3SL Quick Start Manual preview
B3SL
Brand: Omron Pages: 4
Eaton AGswitch Instructions Manual preview
AGswitch
Brand: Eaton Pages: 36
Pakedge SE-18 Quick Start Manual preview
SE-18
Brand: Pakedge Pages: 12
ADS Technologies USBH-604 Connection Manual preview
USBH-604
Brand: ADS Technologies Pages: 2
Ubiquiti EdgeSwitch Quick Start Manual preview
EdgeSwitch
Brand: Ubiquiti Pages: 14
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
B&B Electronics UHR304 Quick Start Manual preview
UHR304
Brand: B&B Electronics Pages: 2
Thinklogical TLX1280 Product Manual preview
TLX1280
Brand: Thinklogical Pages: 45

Brands by name

Popular brands

Load more brands