manualshive.com logo in svg

LevelOne GEL-1061, User Manual

The LevelOne GEL-1061 is a high-quality wireless router designed to provide reliable and fast internet connectivity. For those in need of guidance on setup and operation, a comprehensive User Manual is available for free download from our website. Simply visit manualshive.com to access the manual and optimize your router experience.

Share
Download
background image

Chapter 5

  |  VLAN Configuration

IEEE 802.1Q VLANs

–  142  –

Configuring VLAN

Groups

Use the VLAN > Static (Add) page to create or remove VLAN groups, set 
administrative status, or specify Remote VLAN type (see 

“Configuring Remote Port 

Mirroring” on page 130

). To propagate information about VLAN groups used on 

this switch to external network devices, you must specify a VLAN ID for each of 
these groups.

Parameters

These parameters are displayed:

Add

◆

VLAN ID

 – ID of VLAN or range of VLANs (1-4094).

VLAN 1 is the default untagged VLAN.

◆

Status 

– Enables or disables the specified VLAN. 

◆

Remote VLAN 

– Reserves this VLAN for RSPAN (see 

“Configuring Remote Port 

Mirroring” on page 130

).

Modify

◆

VLAN ID

 – ID of configured VLAN (1-4094).

◆

VLAN Name

 – Name of the VLAN (1 to 32 characters).

◆

Status 

– Enables or disables the specified VLAN.

Show

◆

VLAN ID

 – ID of configured VLAN.

◆

VLAN Name

 – Name of the VLAN.

◆

Status 

– Operational status of configured VLAN. 

◆

Remote VLAN 

– Shows if RSPAN is enabled on this VLAN (see 

“Configuring 

Remote Port Mirroring” on page 130

).

Web Interface

To create VLAN groups:

1.

Click VLAN, Static.

2.

Select Add from the Action list.

3.

Enter a VLAN ID or range of IDs.

4.

Check Status to configure the VLAN as operational.

5.

Specify whether the VLANs are to be used for remote port mirroring.

Summary of Contents for GEL-1061





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GEL-1061

Ubisys S1 Reference Manual preview
S1
Brand: Ubisys Pages: 40
Panasonic WJSX150 - SWITCHER - ADDENDUM Addendum preview
WJSX150 - SWITCHER - ADDENDUM
Brand: Panasonic Pages: 48
OFFICINE OROBICHE PL Series Instruction Manual preview
PL Series
Brand: OFFICINE OROBICHE Pages: 7
Brightlink 16x16 Manual preview
16x16
Brand: Brightlink Pages: 33
D-Link DWS-3160-24TC Datasheet preview
DWS-3160-24TC
Brand: D-Link Pages: 7
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Brand: UfiSpace Pages: 25
Equip Vision 332702 Manual preview
Vision 332702
Brand: Equip Pages: 10
Lantech IPES-3408GSFP User Manual preview
IPES-3408GSFP
Brand: Lantech Pages: 119
J-Tech Digital JTECH-4KPIP0401 Operating Instructions Manual preview
JTECH-4KPIP0401
Brand: J-Tech Digital Pages: 10
Advantech EKI-7659CPI User Manual preview
EKI-7659CPI
Brand: Advantech Pages: 101
I-Tech NPXW117 User Manual preview
NPXW117
Brand: I-Tech Pages: 19
Linkskey LDV-DM702AUSK Quick Installation Manual preview
LDV-DM702AUSK
Brand: Linkskey Pages: 2
Raisecom ISCOM2600G (A) Series Product Description preview
ISCOM2600G (A) Series
Brand: Raisecom Pages: 96
Tvone 1T-MX-3344 Instruction Manual preview
1T-MX-3344
Brand: Tvone Pages: 11
Holley 12-810 Installation preview
12-810
Brand: Holley Pages: 2
QNAP QSW-M5216-1T Quick Installation Manual preview
QSW-M5216-1T
Brand: QNAP Pages: 28
TRENDnet TPE-S50 Quick Installation Manual preview
TPE-S50
Brand: TRENDnet Pages: 6
FS S5850-24S2C Quick Start Manual preview
S5850-24S2C
Brand: FS Pages: 43

Brands by name

Popular brands

Load more brands