LevelOne GEL-1061, User Manual

Page: 255 / 500

Chapter 12
| Security Measures
Configuring the Secure Shell
– 255 –
To use the SSH server, complete these steps:
1.
Generate a Host Key Pair – On the SSH Host Key Settings page, create a host
public/private key pair.
2.
Provide Host Public Key to Clients – Many SSH client programs automatically
import the host public key during the initial connection setup with the switch.
Otherwise, you need to manually create a known hosts file on the management
station and place the host public key in it. An entry for a public key in the
known hosts file would appear similar to the following example:
10.1.0.54 1024 35 15684995401867669259333946775054617325313674890836547254
15020245593199868544358361651999923329781766065830956 10825913212890233
76546801726272571413428762941301196195566782
595664104869574278881462065194174677298486546861571773939016477935594230357741
309802273708779454524083971752646358058176716709574804776117
3.
Import Client’s Public Key to the Switch – See “Importing User Public Keys” on
page 259 to copy a file containing the public key for all the SSH client’s granted
management access to the switch. (Note that these clients must be configured
locally on the switch via the User Accounts page as described on
page 241 .) The
clients are subsequently authenticated using these keys. The current firmware
only accepts public key files based on standard UNIX format as shown in the
following example for an RSA Version 1 key:
1024 35
134108168560989392104094492015542534763164192187295892114317388005553616163105
177594083868631109291232226828519254374603100937187721199696317813662774141689
851320491172048303392543241016379975923714490119380060902539484084827178194372
288402533115952134861022902978982721353267131629432532818915045306393916643
steve@192.168.1.19
4.
Set the Optional Parameters – On the SSH Settings page, configure the optional
parameters, including the authentication timeout, the number of retries, and
the server key size.
5.
Enable SSH Service – On the SSH Settings page, enable the SSH server on the
switch.
6.
Authentication – One of the following authentication methods is employed:
Password Authentication (for SSH v1.5 or V2 Clients)
a.
The client sends its password to the server.
b.
The switch compares the client's password to those stored in memory.
c.
If a match is found, the connection is allowed.
Note: To use SSH with only password authentication, the host public key must still
be given to the client, either during initial connection or manually entered into the
known host file. However, you do not need to configure the client’s keys.