manualshive.com logo in svg

LevelOne GEL-1061, User Manual

The LevelOne GEL-1061 is a high-quality wireless router designed to provide reliable and fast internet connectivity. For those in need of guidance on setup and operation, a comprehensive User Manual is available for free download from our website. Simply visit manualshive.com to access the manual and optimize your router experience.

Share
Download
background image

Chapter 12

  |  Security Measures

DHCP Snooping

–  303  –

inserts the relay agent’s address (when DHCP snooping is enabled), and 
forwards the packets to trusted ports. (This is the default policy.)

Web Interface

To configure global settings for DHCP Snooping: 

1.

Click Security, DHCP Snooping.

2.

Select Configure Global from the Step list.

3.

Select the required options for the general DHCP snooping process and for the 
DHCP snooping information option.

4.

Click Apply

Figure 191:  Configuring Global Settings for DHCP Snooping

DHCP Snooping

VLAN Configuration

Use the Security > DHCP Snooping (Configure VLAN) page to enable or disable 
DHCP snooping on specific VLANs.

Command Usage

◆

When DHCP snooping is enabled globally on the switch, and enabled on the 
specified VLAN, DHCP packet filtering will be performed on any untrusted ports 
within the VLAN.

◆

When the DHCP snooping is globally disabled, DHCP snooping can still be 
configured for specific VLANs, but the changes will not take effect until DHCP 
snooping is globally re-enabled.

◆

When DHCP snooping is globally enabled, and DHCP snooping is then disabled 
on a VLAN, all dynamic bindings learned for this VLAN are removed from the 
binding table.

Summary of Contents for GEL-1061





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GEL-1061

D-Link DGS-1024D - Switch Quick Installation Manual preview
DGS-1024D - Switch
Brand: D-Link Pages: 16
D-Link DGS-1016D - Switch User Manual preview
DGS-1016D - Switch
Brand: D-Link Pages: 44
D-Link DES-6000 Series Firmware Update Manual preview
DES-6000 Series
Brand: D-Link Pages: 3
D-Link DES-5024 - Switch Application Notes preview
DES-5024 - Switch
Brand: D-Link Pages: 2
D-Link DES-3828 - xStack Switch - Stackable Datasheet preview
DES-3828 - xStack Switch - Stackable
Brand: D-Link Pages: 3
D-Link DES-3550 User Manual preview
DES-3550
Brand: D-Link Pages: 192
D-Link DES-3326 Configuration Manual preview
DES-3326
Brand: D-Link Pages: 9
D-Link DES-3226L User Manual preview
DES-3226L
Brand: D-Link Pages: 110
D-Link DES-1026G User Manual preview
DES-1026G
Brand: D-Link Pages: 10
D-Link DES-1008D Manual preview
DES-1008D
Brand: D-Link Pages: 17
D-Link DES-1005P Quick Install Manual preview
DES-1005P
Brand: D-Link Pages: 4
D-Link DGS-1210-28P Manual preview
DGS-1210-28P
Brand: D-Link Pages: 9
D-Link DES-1024D Brochure preview
DES-1024D
Brand: D-Link Pages: 4
D-Link DGS-105 - Switch Datasheet preview
DGS-105 - Switch
Brand: D-Link Pages: 4
D-Link DES-1024D Quick Install Manual preview
DES-1024D
Brand: D-Link Pages: 2
D-Link des-1016a Quick Install Manual preview
des-1016a
Brand: D-Link Pages: 2
D-Link xStack DGS-3420 Series How To Set Up preview
xStack DGS-3420 Series
Brand: D-Link Pages: 2
D-Link DXS-3600-32S Quick Installation Manual preview
DXS-3600-32S
Brand: D-Link Pages: 29

Brands by name

Popular brands

Load more brands