LESsoft configuration software
Leuze electronic
LES 36
90
TNT
35/7-2
4
V
9.4.5
Analog Output tab - configuring the analog output (only LES 36…/VC)
For analog devices, you can configure the analog voltage and current output of the
LES 36…/VC6 in the
Analog Output
tab.
Figure 9.11: Parameter settings in LRSsoft
The following settings can be made for the analog output:
Edge
Selection of from which EAW (Edge Analysis Window) the measurement value is to be trans-
mitted.
Output Mode
Selection of whether the current or voltage output is to be used as the process interface.
Data
Selection of which value of the selected EAW is to be output at the analog output. Select
from the following measurement values:
• Edge positions:
LX
,
LZ
,
RX,
RZ
-
LX
= Left edge X-coordinate
-
LZ
= Left edge Z-coordinate
-
RX
= Right edge X-coordinate
-
RZ
= Right edge Z-coordinate
• Width of objects:
W
• Height difference of left and right edge:
H
