Integrating the LES in the process control (Ethernet)
Leuze electronic
LES 36
100
TNT
35/7-2
4
V
10.3
Ethernet commands
Attention!
The scope of the available commands has grown from firmware version to firmware version.
You can find a
revision history / feature list
in the appendix in Chapter 16.2.
The commands described in the following refer to the
current
firmware version of the LES.
Note!
The sequence in which the individual bytes of the commands and of the protocol must be
transmitted in order to be processed by the LES corresponds to the "little-endian" byte se-
quence. The response of the LES also corresponds to the "little-endian" standard. For further
information, see the note in Chapter 10.2.
All other commands are acknowledged with 'Not Ack'=0x414E; the command is not
processed.
Additional commands are available in command mode.
