Appendix
Leuze electronic
LES 36
145
TNT
35/7-2
4
V
16.2
Revision History / Feature list
16.2.1
Firmware
Profile
Profile data
Distance and position progression of one or more measurements, coordinates of
the respective X/Z-values when passing through the laser beam along the x-axis.
2D view
Graphical presentation of the X/Z-coordinate values of an object within the detec-
tion range.
Trigger
Triggering one or more measurement processes with precise time allocation.
UDP
Standardized connectionless Ethernet protocol, Layer 4.
Firmware
Function range
Meaning
Required
configuration software
Beginning
with V01.10
Multiple inspection tasks
for the LPS 36
Up to 16 different configurations
can be stored in the sensor;
switch between configurations
by means of a command
LxSsoft V1.20 (LPSsoft V1.20,
LRSsoft V1.04)
Beginning
with V01.20
Optimized encoder inter-
face
LPS 36/EN:
single-channel encoders are
also supported, encoder options,
new factory settings
LxSsoft V1.20 (LPSsoft V1.20,
LRSsoft V1.10)
Deactivation of data out-
put - X-coordinates
LPS 36:
reduction of data quantity (useful
for PLC evaluation)
Extension of the transmis-
sion pause between the
Z- and X-data packets
LPS 36:
improved reading of data pack-
ets (useful for PLC evaluation)
Ethernet trigger
Reduction of data quantity (use-
ful for PLC evaluation), reduction
in cabling
Beginning
with V01.25
PROFIBUS
support
Other LRS 36/PB device types
with PROFIBUS
LxSsoft V1.30 (LPSsoft V1.30,
LRSsoft V1.20)
Ethernet sensor activation Activation now possible via
Ethernet. Reduction in cabling
Factory setting - analysis
depth 1 for LRS 36
LRS 36: the maximum detection
rate can be achieved with this
setting.
Beginning
with V01.30
Supports
LES 36
Additional device types LES 36/
PB with PROFIBUS and LES 36/
VC with analog output
LxSsoft V1.40 (LPSsoft V1.33,
LESsoft V1.10, LRSsoft V1.20)
Table 16.1:
Revision History - Firmware
